-40%

DIY SHUFFLEBOARD TABLE PLANS - BUILD A GREAT TABLE OF YOUR DREAMS! - ILLUSTRATED

$ 15.7

Availability: 347 in stock
  • Item must be returned within: 30 Days
  • Country/Region of Manufacture: United States
  • Condition: New
  • Refund will be given as: Money Back
  • Restocking Fee: 20%
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Brand: ZieglerWorld
  • All returns accepted: Returns Accepted

    Description

    Build the home shuffleboard table of your dreams!
    These plans by are time tested and have helped many customers build their home shuffleboard table.
    The plans contain 22 pages of information that take you from start to finish in building your own shuffleboard table.  The plans are printed in color on 8 1/2“ x 11“ premium paper.  The spiral binder allows them to sit flat while referring to them in your shop.  Many of the pages also include photos for additional clarity.
    THE BEST SELLING PLANS EVER MADE - Book by AB Shuffleboard!  Over
    5,000
    + Sets Sold since published!
    The Plans from AB Custom Shuffleboard are step by step plans and are easy to follow and include many pictures and illustrations. You can build a
    12', 14’, 16’ or longer table.
    These Plans will allow you to build a top quality table -
    not a cheap home table like other plans
    .
    If you are going to put the time into building a table - you will want a table worth thousands.  Our Plans will allow you to make the table of your dreams.
    We have been on Ebay since 1997!  Our Plans and Products are time tested - check out our feedback!
    We Provide Technical Help "help desk" support
    FREQUENTLY ASKED QUESTIONS
    Q. How many hours does it take to build a table?
    A. The time to build a table can vary greatly depending on the skill level of the builder and tools that they have. The following times are intended to give a rough estimate for average skill level and a typical shop.
    Frame and leg construction: 30 hours
    Playing surface constuction: 15 hours
    Frame finishing: 6 hours
    Playing surface finishing: 10 hours
    Final assembly: 3 hours
    Q. How much will the table materials cost?
    A. The following is a materials cost estimate. A large part of the cost difference is whether you build the maple playing surface or have someone make it for you.
    Materials (Low side To Hide Side):
    Maple Table top
    0.00 To 0.00
    60 bdft for frame (hardwood)
    0.00 To 0.00
    3 sheets hardwood plywood
    0.00 To 0.00
    24' of trim
    .00 To .00
    Feet levelers
    .00
    Sandpaper
    .00
    Glue
    .00
    Stain and Varnish
    .00 To .00
    Abacus beads
    and paint
    .00
    Carpet, #'s and stripes
    .00 To 0.00
    Hardware
    .00
    TOTAL = 1.00 To ,320.00
    Q. What tools are needed to build a table?
    A. Building a shuffleboard table requires most of the tools found in a typical wood shop. Although I suppose a table could be built with hand tools, the following list is highly recommended:
    Table saw, Miter saw, Random orbital sander, Surface Planer (this somewhat depends on whether you make the playing surface or have someone make it. It also depends on the condition of the wood used to build the frame).
    Drill / Driver and bits, Router, Biscuit jointer, Various size clamps, Saw horses, Jig saw (band saw is also helpful), Tape measure, carpenters square, long straight edge, etc.
    Q. What size table can be made from the plans?
    A. The plans are primarily geared toward making a 14' table (mostly the images). However, the plans do have various charts within the bill of materials that allow for shorter or longer tables. Longer tables do require some changes that are discussed in the plans, but not necessarily detailed out. For example, to build a 16' table the primary change is adding a center leg. Tables that are 18' and longer are to be built as a two piece frame.
    Q. Do the plans address climate adjusters?
    A. For those that may not know... climate adjusters are metal devices that get bolted to the underside of the playing surface in order to compensate for table warping. Tables can warp slightly due to changing temperature and humidity conditions. Installing climate adjusters allows for the control of table warping. (almost like braces on teeth). Although the plans do not include climate adjuster instructions, they do allow for adjusters to be installed through slots that get cut into the table bed.
    Climate adjusters
    can then be purchased from our
    store.
    Sample Pictures are attached.
    Shipping & Payment Information:
    Shipping & Handling costs for this product is Free.  This cost assumes shipments in the UNITED STATES.
    When you are finished with your table -- Check out ZieglerWorld Table Shuffleboard Pucks -- Available in over 21 different colors-- to match your favorite color or team!
    Don't worry - We have been selling on Ebay since 1997!!!
    Have a Shuffleboard Question?  Email Us!